Heated jet wash chamber – for preparation of the surface before painting
Washing system, fogging designed to remove oils and dirt. It is also used to apply a conversion layer to the surface to be prepared before painting.
Properly prepared surface with the help of mist-forming systems in comparison to manual preparation before painting can increase the service life of the applied protective coating many times.
Surface preparation chamber is designed for automatic blasting of steel, galvanized, aluminum and other surfaces.
At least 3 chambers are used as a part of painting complex. One is responsible for degreasing and phosphating of products, the second – for primary washing of parts and the third – for finish washing. Additional chambers with other preparation stages can be added if desired.
The washing solution is pumped to the nozzles, which wash away all contaminants on the parts.
Afterwards, the liquid flows into the bath and back to the nozzles.
- For chemicals – 2 m3;
- For flushing – 1 m3;
- For flushing DEMI (or regular water) – 1 m3
Power of heating elements – 36,00 kW;
Total power of washing system – 54,50 kW
Control Unit – European components.
Power part on Schneider starters. Control of the touch panel OVEN. With the ability to control the temperature and flushing period. At the end of the process sound and light signals are given.
50% – advance payment, 50% – before shipment from the contractor’s warehouse.
Terms of Delivery:
Terms of delivery EXW Incoterms 2010, under a separate agreement possible conditions FCA.
The installation is carried out by Grafix company with the help of the customer’s employees (minimum 5 people). Term of work execution is 2-15 days.
Guarantee 12 months
Post-Guarantee service is available by additional agreement.