Catalogue Catalogue
Home Catalogue Sprayers Electrostatic sprayers
Electrostatic sprayers

Electron Electron E-COAT-BASIC

E-COAT-BASIC Electron setting

 

Electron Basic H manual installation is intended for powder coating by electrostatic spraying in industrial conditions on metal products, as well as on non-metal products coated with conductive material. This installation is convenient in operation and shows excellent results in dyeing. The regulation of the charge of the corona field provides better staining of products with complex surface shapes.

 

Specifications

Control unit:

  • Input voltage: 220 V AC
  • Input frequency: 50/60 Hz
  • Power Consumption: 34 W
  • Output voltage: DC 12.5 V
  • Output frequency: 16 kHz
  • Electrical safety class: IP 54
  • European standard: EN 500-50
  • Spray flow: 5 - 30 kg / hour
  • Air pressure: 5-6 bar (5.92 atm) (max)
  • Air consumption:. 300 l / min (max)
  • Air quality: oil - 0.1 ppm (max.), humidity - 1.3 g / m3 (max.)

Sprayer :

  • Voltages: 30kV - 85kV
  • Current strength at the sprayer outlet: 30 µa - 120 µa
  • Charge: Negative
  • Cable length: 5 m
  • Hose length: 5 m
  • Sprayer weight: 645 g