Catalogue Catalogue
GRAFIX 3 NANO H2O

GRAFIX 3 NANO technology

Special air-abrasive cleaning system for pre-cleaning. Suitable for small workloads, as well as for places where local processing is required.

The devices of this family come in three trim levels. It is based on an apparatus with a 3 liter tank. During operation, it is usually completely emptied, which improves the quality of processing; when changing abrasive material, mixing with the previous abrasive does not occur. For the convenience of loading the device, it is equipped with a plastic funnel.

GRAFIX 3 NANO H2O

The device is provided with a combined processing system (it can work both with the addition of water in the abrasive stream and without it), it is connected via quick-disconnect couplings to the compressed air and fluid lines. On request it can be equipped with two easily replaceable guns of different types, i.e. standard types with a compressed air mixture supply system with abrasive material and the ability to supply fluid, as well as with a Helix gun that delivers the abrasive mixture with vortices. Equipped with mixers for dispensing the amount of abrasive supplied and the amount of fluid supplied.

Technical Parameters:

  • Capacity - 3 L
  • Nozzle diameter - 3 mm
  • The shape of the nozzle outlet is cylindrical
  • Hose length - 2.5 m
  • Working pressure - from 0.2 to 8 bar
  • Compressed air consumption - 300 l / min.
  • Weight - 10 kg
  • Operating temperature range - 0 ... 50 ⁰С

A set of accessories is available for a fee:

  • 1 cylindrical nozzle - Ø 2 mm
  • 1 cylindrical nozzle - Ø 4 mm
  • 1 Venturi nozzle - Ø 2.5 mm
  • 1 Venturi nozzle - Ø 4 mm
  • 1 spare nozzle holder
  • 1 hose connector